4W 50mm Stop and Tail with Bayonet fitting -277-

£16.00
In stock
SKU
50-ST-B-277

Plug in Red Stop and Tail  LED board for various vehicles

50mm diameter version.

12V negative earth

 

12 Volt Stop and Tail module

Aluminium circuit board

4 x 1 Watt Red LEDs for Stop Lamp

Stop lamps under driven for tail light

Plugs into existing lamp holder

Reacts faster than an incandescent bulb.

Brighter than a traditional Bulb

dipped in conformal coating for environmental protection

2 transistor current control circuit.

Tail light draws 100 mA at 12V   or less than 1 Watt, reducing the load on charging systems (compared to a 5W traditional bulb)

Stop light draws 260mA at 12V or less than 4 Watts, considerably less than the 21W of a conventional bulb

 

Main disc is 50mm,

Can be used with our 90 degree adapter

 

 

Write Your Own Review
You're reviewing:4W 50mm Stop and Tail with Bayonet fitting -277-
Copyright © 2017 Spiyda Ltd. All rights reserved. Registered office - 54 Bridgnorth Road, Stourbridge. DY8 3QG. Registered in England and Wales, Company Registration Number 10511733