4W 65x50mm Stop and Tail bare board -345-

In stock

Red Stop and Tail  LED board for various vehicles

65x50mm  version.

12V negative earth


12 Volt Stop and Tail module

Aluminium circuit board

4 x 1 Watt Red LEDs for Stop Lamp

Stop lamps under driven for tail light

Requires solder connection

Reacts faster than an incandescent bulb.

Brighter than a traditional Bulb

dipped in conformal coating for environmental protection

2 transistor current control circuit.

Tail light draws 100 mA at 12V   or less than 1 Watt, reducing the load on charging systems (compared to a 5W traditional bulb)

Stop light draws 260mA at 12V or less than 4 Watts, considerably less than the 21W of a conventional bulb


Measures 65 x 50mm (note bayonet is slightly off centre)

this item will need connections made by soldering.

the board can be drilled for mounting



Write Your Own Review
You're reviewing:4W 65x50mm Stop and Tail bare board -345-
Copyright © 2017 Spiyda Ltd. All rights reserved. Registered office - 54 Bridgnorth Road, Stourbridge. DY8 3QG. Registered in England and Wales, Company Registration Number 10511733